Multi Parameter Bante-900 PCN, Water Quality Multi-Parameter, pH Meter, Ion Meter, ORP meter, Conductivity Meter, TDS Meter, Sanility Meter, Do Meter, Temperature Meter

Jual Multi Parameter Bante-900 PCN, Water Quality Multi-Parameter , pH Meter , Ion Meter , ORP meter , Conductivity Meter , TDS Meter , Sanility Meter , Do Meter , Temperature Meter Specifications * Multiparameter meter * Automatically freezes stable values * Memory stores up to 500 readings * USB communication interface Bante900P multi-parameter meter is capable of measuring up to 9 water quality parameters, including pH, ORP, Ion, Conductivity TDS, Salinity, Resistivity, Dissolved Oxygen, etc. pH Mode: * Up to 5 points push-button calibration with auto-buffer recognition. * Selectable pH buffer standards, resolution and temperature units. * Automatically calculates and displays electrode slope that helps you decide whether to replace pH electrode. ORP Mode: * Single point offset calibration allows user adjusts displayed value to a known standard. * Absolute or Relative mV measurements provides accurate readings. Ion Mode: * Standard BNC connector can connects many Ion Selective Electrode. * 2 to 5 points push-button calibration from low to high concentrations. * Selectable multiple concentration units, including ppm, mg/ L, mol/ L. * Direct readout ion concentration simplifies measurement process. * mV measurement allows user to check performance of ion electrode. Conductivity/ TDS/ Salinity Mode: * Up to 5-point push-button calibration allows user to uses customized calibration solutions. * Adjustable TDS factors, cell constants, temperature coefficients and normalization temperature. * Selectable linear or pure water compensation modes. * In salinity measurement modes, selectable practical salinity ( PSU) or seawater measurement standard ( ppt) . Dissolved Oxygen Mode: * 1 or 2 points auto-calibration ( 100% in saturated air or air-saturated water, 0% in zero oxygen solution) . * Manual salinity and barometric pressure compensation. * Selectable readout in ppm, mg/ L or percentage saturation. General Features: * Automatic Temperature Compensation ensures highly accurate measurements over the entire range. * Calibration due reminder helps you to calibrate meter regularly. * Automatic endpoint function freezes stable measured values. * Help message as a operational guide to helps you understand how to use meter. * Setup menu lets user customize the calibration points, stability conditions, date and time to meet measurement requirements. * Expanded memory stores and recalls up to 500 readings. * Built-in real-time clock stamps stored data to meets GLP. * Stored data can be transferred into PC via USB communication interface. Specifications: pH Range: -2.000~ 20.000pH pH Accuracy: ± 0.002pH Resolution: 0.001, 0.01, 0.1pH, Selectable Calibration Points: Up to 5 points Calibration Solutions: USA( pH1.68/ 4.01/ 7.00/ 10.01/ 12.45) , NIST( pH1.68/ 4.01/ 6.86/ 9.18/ 12.45) , DIN( pH1.09/ 4.65/ 6.79/ 9.23/ 12.75) Ion Concentration Range: 0.001~ 19999ppm, mg/ L, mol/ L ( Depending on measuring range of Ion Selective Electrode) Ion Concentration Accuracy: ± 0.5% Full Scale ( Monovalent) , ± 1% Full Scale ( Divalent) Calibration Points: 2 to 5 points Calibration Solutions: 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/ L, mg/ L mV Range: -1999.9~ 1999.9mV mV Accuracy: ± 0.2mV Resolution: 0.1, 1mV, Selectable Conductivity Range: 0~ 20mS/ cm ( Max.200mS/ cm) Conductivity Accuracy: ± 0.5% Full Scale Calibration Points: Up to 5 points Calibration Solutions: 10uS/ cm, 84uS/ cm, 1413uS/ cm, 12.88mS/ cm, 111.8mS/ cm TDS Range: 0~ 10ppt ( Max. 20ppt, Depending on factor setting) TDS Accuracy: ± 1% Full Scale TDS Factor: 0.1~ 1.0 ( Default 0.5) Salinity Range: 0~ 10ppt ( Max.80ppt) Salinity Accuracy: ± 1% Full Scale Salinity Measurement Modes: Practical Salinity ( PSU) or Seawater Measurement Standard ( ppt) Resistivity Range: 0~ 100M© Resistivity Accuracy: ± 1% Full Scale Resolution: 0.001, 0.01, 0.1, 1, Automatic Temperature Coefficient: 0.0~ 10.0% per ° C Compensation Modes: Linear or Pure Water Cell Constant: K= 0.1, 1, 10, Selectable Normalization Temperature: 20° C or 25° C Dissolved Oxygen Range: 0.00~ 20.00mg/ L or ppm Resolution: 0.01, 0.1mg/ L, Selectable Dissolved Oxygen Accuracy: ± 0.2mg/ L ( Calibration and measurement under the conditions of same temperature) % Saturation of Oxygen: 0.0~ 200.0% Accuracy: ± 2.0% Salinity Correction: 0~ 50g/ L Pressure Correction: 60.0~ 112.5kPa, 450~ 850mmHg Temperature Range: 0~ 105° C, 32~ 221° F Temperature Accuracy: ± 0.5° C, ± 0.9° F Temperature Calibration: Manual Temperature Compensation: 0~ 100° C, 32~ 212° F, Automatic or Manual; DO Mode: 0~ 50° C, 32~ 122° F, Automatic Auto-Off: Manual or Automatic ( 10, 20, 30 minutes after last key pressed, Selectable) Hold Function: Manual or Automatic Stability Conditions: Low or High, Selectable Calibration due reminder: 0 to 30 days Reset Function: Yes Memory: 500 data sets with Date/ Time stamping Output: USB Communication Interface Connector: BNC and 6-pin connector Power Requirements: 3× 1.5V " AA " Batteries Battery Life: Approximately 150 hours Dimensions: 170( L) × 85( W) × 30( H) mm Weight: 300 grams Order Code and Accessories: Order Code: Bante900P-UK * P11 Glass pH Electrode ( Made in UK) * K10 Conductivity Electrode ( Made in UK) * DO100 DO Probe ( Made in US) * TP-10K Temperature Probe * pH Buffer Pouches ( pH4.01, 7.00, 10.01) * Conductivity Calibration Solutions ( 146uS/ cm, 1413uS/ cm, 12.88mS/ cm) * Carrying Case and “ AA” Batteries Order Code: Bante900P-CN * E65-1-BNC Glass pH Electrode * CON-1 Conductivity Electrode * DO100 DO Probe ( Made in US) * TP-10K Temperature Probe * pH Buffer Pouches ( pH4.01, 7.00, 10.01) * Conductivity Calibration Solutions ( 146uS/ cm, 1413uS/ cm, 12.88mS/ cm) * Carrying Case and “ AA” Batteries